#include <nng/transport/tls/tls.h>
int nng_tls_register(void);| This documentation is for version v1.7.3 of NNG, but the latest released version is v1.8.0. see the documentation for v1.8.0 for the most up-to-date information. |
nng_tls(7)
NAME
nng_tls - TLS transport
SYNOPSIS
DESCRIPTION
The tls transport provides communication support between peers across a TCP/IP network using TLS v1.2 on top of TCP. Both IPv4 and IPv6 are supported when the underlying platform also supports it.
The protocol details are documented in TLS Mapping for Scalability Protocols.
Registration
Depending upon how the library was built, it may be necessary to
register the transport by calling
nng_tls_register().
Availability
The tls transport depends on the use of an external library. As of this writing, mbedTLS version 2.0 or later is required.
| Applications may need to add this library (or libraries) to their link line, particularly when using a statically built library. |
| The mbedTLS library uses different licensing terms than NNG itself; as of this writing it is offered under either Apache License 2.0 or GNU GPL terms. You are responsible for understanding and adhering to the license terms of any libraries you use. |
URI Format
This transport uses URIs using the scheme tls+tcp://, followed by
an IP address or hostname, followed by a colon and finally a
TCP port number.
For example, to contact port 4433 on the localhost
either of the following URIs could be used: tls+tcp://127.0.0.1:4433 or
tls+tcp://localhost:4433.
A URI may be restricted to IPv6 using the scheme tls+tcp6://, and may
be restricted to IPv4 using the scheme tls+tcp4://.
Specifying tls+tcp6:// may not prevent IPv4 hosts from being used with
IPv4-in-IPv6 addresses, particularly when using a wildcard hostname with
listeners.
The details of this varies across operating systems.
|
Both tls+tcp6:// and tls+tcp4:// are specific to NNG, and may not
be understood by other implementations.
|
| We recommend using either numeric IP addresses, or names that are specific to either IPv4 or IPv6 to prevent confusion and surprises. |
When specifying IPv6 addresses, the address must be enclosed in
square brackets ([]) to avoid confusion with the final colon
separating the port.
For example, the same port 4433 on the IPv6 loopback address ('::1') would
be specified as tls+tcp://[::1]:4433.
| Certificate validation generally works when using names rather than IP addresses. This transport automatically uses the name supplied in the URL when validating the certificate supplied by the server. |
The special value of 0 (INADDR_ANY) can be used for a listener
to indicate that it should listen on all interfaces on the host.
A short-hand for this form is to either omit the address, or specify
the asterisk (*) character.
For example, the following three URIs are all equivalent,
and could be used to listen to port 9999 on the host:
-
tls+tcp://0.0.0.0:9999 -
tls+tcp://*:9999 -
tls+tcp://:9999
The entire URI must be less than NNG_MAXADDRLEN bytes long.
Socket Address
When using an nng_sockaddr structure,
the actual structure is either of type
nng_sockaddr_in (for IPv4) or
nng_sockaddr_in6 (for IPv6).
Transport Options
The following transport options are available. Note that setting these must be done before the transport is started.